MASTECH MS2006B High Sensitivity AC Leakage Clamp Meter AC Current Detector , 0.01mA to 60A , 1uA Resolution

MASTECH MS2006B High Sensitivity AC Leakage Clamp Meter AC Current Detector , 0.01mA to 60A , 1uA Resolution
  • Продавец
  • Список ценUS $57.00piece
  • Продажная ценаUS $57.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,2 (203)

Oписание продукта


1.The meter can be used for testing power, voltage, current, peak value, phase, frequency, power factor, phase angle, and reaction factor, etc. of single-/three-phase circuit; automatic phase sequence testing is possible for 3-phase measurement. 

2.True effective value measurement: accurate measurement is possible even with serious distortion in current waveform.

3.Low-consumption high-speed single-chip microprocessor is employed and sophisticated algorithm is applied, as a result, results can be obtained rapidly and precisely, and up to 20 harmonics and distortion value thereof can be measured.

Hand-held, clamp-type structure, with light weight, convenient for carry-on.



Complies with IEC/EN 61010-1 1000V CAT II ,600 V CAT III

1.Max. common-mode voltage: 600V AC RMS

2.Mode of display: LCD display; Max. reading: 6000

3.Range selection: Fully automatic range selection

4.Frequency detection: automatic (when harmonic is serious, it is better to use manual settings for testing frequency so as to assure the reading stability)

5.Over-range display:  “OL” 

6.Data holding:  “HOLD” is shown on LCD

7.Power supply: 3 batteries of 1.5 V, AAA

8.Power consumption: 250 mW

9.Storage temperature: - 20 °C ~ 70 °C

10.Operating temperature: 0 °C ~ 40 °C

11.Temperature Coefficient:0.05×(specified accuracy)per°C

12.Electromagnetic Compatibility: In an RF field of 3V/M,accuracy=specified accuracy , Otherwise accuracy is unspecifieced.

13.Operating Altitude: 2000m CAT III 600V; 3000m CAT II 600V

14.Store Altitude: 12000m

15.Dimensions: 208mm×78mm×35mm

16.Weight: about 350 g  (with battery)


Technical specification

Accuracy:  ±(% read + graduation #) ambient temperature: 18°C ~ 28°C, Humidity 80%, frequency for voltage, current: 45 Hz ~ 65 Hz


Package Contents:


1 x Digital Clamp Meter

1 x Carrying Case

1 x Test Leads